Product Specifications
Counter and cabinet size
Your sink choice is restricted by the size of the cabinet and counter top. Measuring each correctly will help you save time and guide you into making the right choice.
- Measure the cabinet size under the existing sink or where the new sink will go.
Measure from gable to gable (left to right) See Diagram A. Be sure to measure from OUTSIDE EDGE to OUTSIDE EDGE.
This is the MINIMUM CABINET SIZE.
Only a sink with this cabinet size measurement or smaller will fit.
Many sink manufacturers will tell you the minimum cabinet size required for each of their sinks.
- Most kitchen cabinets are standard 24" measurement front to back. The width (front to back measurement) of the sink that can be used is determined by this measurement and whether or not the counter top has a back splash. See diagrams B andC.
|
Diagram A
|
- If the counter top has no back splash and the cabinet is of standard size, a sink that measures up to 22" deep (front to back) will fit. See diagram Diagram B
- If the counter top has a back splash, a sink with front to back depth of up to 20-1/2" will fit. See Diagram C.
Diagram B |
Diagram C |
In brief:
With standard cabinet size of 24" and counter top with no backsplash:
A sink of up to 22" depth should fit.
With cabinet size of 24" and counter top with a backsplash:
A sink of up to 20 1/2" depth should fit.
Warranty
BLANCO Warranty Statement
STAINLESS STEEL, SILGRANIT® AND SILACRON® SINKS
BLANCO CANADA INC. hereafter referred to as BLANCO, is pleased to offer a limited lifetime warranty with all BLANCO sinks used in normal domestic installations. BLANCO warrants its sinks to be free from all manufacturing defects in material and workmanship.
BLANCO will repair or replace, at no charge, excluding labour, any sink supplied by BLANCO that is proven to be defective under normal use. An equivalent replacement will be issued to the original owner provided the defective sink was installed in accordance with BLANCO installation procedures, used and cleaned as recommended and not damaged due to abuse, misuse or negligence. Chips, scratches and stains are not deemed to be manufacturing defects. BLANCO will not be held liable for chips, scratches and stains that can occur under normal use over a period of time. Please refer to cleaning instructions to maintain your sink in its original appearance. BLANCO shall not be held liable under this warranty where the sink has been used in a non-domestic application, improperly installed, damaged from the impact caused by a heavy object being dropped on the sink or for improper handling. BLANCO shall not be liable for any inconvenience or expense for material or labour related to the removal or replacement of a defective sink or for any loss or damage to any person or property whatsoever resulting from the defective sink. All transportation costs to and from the point of purchase will be the responsibility of the purchaser.
Any sink returned must be in the original packaging and include all the accompanying accessories, parts and documentation. BLANCO reserves the right to inspect any sink reported to be defective prior to replacement of the sink.
WARRANTY EXCLUSIONS
Excluded are any accessories that accompany the sink (strainers, waste fittings, waste chutes etc.). BLANCO guarantees all sink accessories to be free from manufacturing defects for one year.
